The LOCTITE® VA40 CA Volumetric Valve is designed to dispense drops of cyanoacrylate (1.5 to 6 microliters, at a maximum cycle rate of 120/minute). It includes a check valve design, which improves the speed and reliability of priming. And an innovative displacement rod and sealing system means you can rely on a long dispensing life before you need to think about rebuilding. Good to know: Easily integrates with LOCTITE reservoirs and controllers. You may also need: When the time does come to rebuild, the LOCTITE Cyanoacrylate Dispense Valve Rebuild Kit has you covered.
FEATURES:

• Designed for precision, volumetric drop dispensing of LOCTITE cyanoacrylate (CA) adhesives
• Long life seal design (> 1 million cycles) minimizes maintenance requirements
• Quick and reliable priming
• Easily fed from a syringe or pressure reservoir
• Included in the Box: (1) VA40 CA Dispense Valve, (1) PTFE lined tubing, 6.4mm OD, 2 m long, (1) air line, 4mm OD, blue, 2 m, (1) air line, 4mm OD, yellow, 2 m, (1) needle sample kit, (1) operating manual